Illustration Photo
Jakarta, Spami-id.com - one of the problems that happens often is drag motor disc brakes, so that the tires can't spin at the most. Besides being uncomfortable to ride because it feels heavy, it also makes gasoline more wasteful. Really?
Yes, it's because the machine has to work harder to move the motor and obviously need more gas for a greater burning to get the energy needed.
The condition of the disc brakes drag or jam can occur because some of the causes as the following summation:
- Rusted disc brake caliper piston
The drag disc brakes can be caused by rusty pistons that make them not return to their position, even though the brakes have been removed. It makes the brake battery depressed and attached to the disc or the brake disc.
- A lot of shit sticking
Poop could also be the main cause of the drag motor disc brakes. The smooth dust dust attached to the brake plate and also the caliper can cause the brakes to jam. If it's not cleaned, then this makes the brakes worse.
Post-Flood Motor Care Infographic
- Brake
Each type of motor has a different brake code, even if it has the same shape. If using a different code, it could cause a maximum kaliper not to work that makes the motor disk brakes drag and causes gas to waste.
How to handle it
If it's already in the brakes of a drag-or-jam motor disc, it can be handled in different ways according to the cause. If you have an adequate tool, you can do it alone at home.
However, it is still advised to take him to the motor shop with an experienced mechanic to make sure the brakes of the motor disc work maximum.
The drag brakes are due to dirt
To overcome the disc brakes the drag from the dirt is by washing the caliper, the collapse, and the record. In order to clean it thoroughly, it is advised to open all components to be cleared one by one.
