Illustration Photo
Jakarta, Spami-id com - car battery problems are weakening or problems facing car owners. Aki weakens can be caused by use or can also be caused by an electrical device like a lamp that still lights up in a dead car engine.
But the tail battery can still be used for a while in a charger. To charge a weak car battery, the most necessary thing is the jumper cable to channel power.
Charger car battery using jumper cable done by connecting two. One functional battery and both batteries.
Here's how the Aki chargers are weak cars.
- Open the hood or the compartment where the battery is located in each vehicle.
- Observe terminal positive and negative on each battery. Positive terminals are shown with plus (+) and negative terminals shown with less (-) flags and do not switch.
- Connect both positive edges of the jumper cable to the positive terminal each battery.
- Positive jumper cables are usually red if not marked otherwise. Start Jumper
- Connect the negative end of the jumper cable to the negative terminal battery. Negative jumper cables usually have black.
- Connect the negative end of the jumper cable to the metal component embedded in the car where the battery is weak. This will make the car a delivery when jump- start is done.
Once the charge is done, turn on the car engine that the battery has gone through. When the engines are activated, the charging system will begin to charge the weak battery via the jumper cable. Let's keep the car alive for a while so we can get a maximum search of the battery.
